water-bath continuous pasteurized sterilizing and cooling machine
The sterilizer is newly desiqned on the basis of absorbing
technology of same produces in Japanese light industry it is
specially applied for the second time sterilization of dairy,
beverage and jelly the parts contacting packing products are all
made of SUS304 stainless steel, and the large chain board and chain
wheel adopt sane materials .It has the functions of anti-acid
,anti-alkali, anti-corrosion. The water tank is heated by steam,and
the steam volume is automatically controlled by steam solenoid
valve. The hot water can be made full use of .The whole machine has
such characteristics as reasonable design, fine manufacturing,
stable operation and beautiful. Technical parameters:
The first section uses water at 30 degrees;
The second part is at 50 degrees,
and the third part adopts aseptic water spray.
The outlet bottle temperature is below 40 degrees. Features
1) The chain plate is a brand product
2) The conveyor is frequency controlled
3) All nozzle and spray tubes are made of stainless steel and spray
4) The catchments flume is made of stainless steel and equipped
with a level alarm device
5) The spray-cooling tunnel has a spray cooling recycling water
pump and steam adjustment valve
6) Steam consumption is adjusted according to the temperature
7) 304Stainless Steel machine frame and machine body...
The circular hot water is used to sterilize, the circular warm
water is used to pre-cool, and the cooling water is used to cool.
It is character of the low noise, accurate temperature controls,
the adjustability of the sterilizing time and the automatic control
system of the sterilizing temperature. The high quality stainless
steel, the world famous Intralox polypropylene net belt, the
high-grade spray nozzle and the Japanese and the German electricity
part are applied, the entire machine quality the imported
The basic principle of this unit is that water is used as the heat
exchange medium. The sterilizing water is heated through a tube
type heater and is evenly sprayed on the bottle or can surface for
promoting the product temperature to the sterilizing level. After
sterilization, the product shall be moved to the cooling area,
though spraying cold water, the product temperature is lowered down
to the room temperature. All the used water shall flow back to the
bottom tank for recycling.
|Sterilizing time||10-35 minute speed infinitive adjusting|
|10-25 minute speed infinitive adjusting|
|Link belt time||0.17-10m minute speed infinitive adjusting|
|Centrifuge blower fan||3kw|
Whole production line for juice/milk/water/yogurt/jelly
2-Mixing tank with high speed shearing
5-Storage tank with mixer
8-Bath sterilization machine
10-Carton packing machine
11-Date printing machine for packaging
(1)100% factory tested before shipment
(2) 1 Year's Quality Warranty
(3) 2 Years of trouble free service offered
(4) Solve problems within 24 hours
Best quality+ Thoughtful service=100% trust
A: 100% Advanced Payment by T/T /100% by Western Union Payment
/100%L/C at sight /Ways agreed by both parts ;
A: Within 10-15 days except QTY larger than 10Sets;If 60HZ,at least
(3)Q:MOQ for RO system?
A: 1 set ;
Air compressor Pumps Date printing machine
Main system Pumps Air compressor
1-- It can filling and sealing any shapes bag(including stand up bag
with spout Straw bags).
It suitable for various liquids such as water, fruit juice, ice
lolly,yogurt,soymilk, Japan Tofu,milk,beverage,liquid soap etc.
2--Full set of the sealing system adopts copper material, the heat
conduction modulus is very high, so the sealing is very tight and
3--The whole machine made by high quality 304 stainless steel.
4--The pipe which touch the liquid adopts the food grade standard.
5--The heat sealing blade made by special process, replaced the
high temperature tape, so it will save more consumable spare parts
after many years using..
6--8 nozzles,high speed max 3000bags/hour.(different size bag with
7-- Touch screen PLC computer control system, very easy operation.
PLC : Japan Omron
Electric component : Japan Omron
Pneumatic component : Taiwan Airtac
2.Main technical parameter